The concept is a versatile bondage bar system. PVC pipes are screwed into a central connector with the large eye bolts, which can be removed in multiple fashions (T-shape, X-shape, I-shape, L-shape). Smaller eye bolts are screwed into the end and middle of each pipe. This allows for a myriad of bondage utilities:
- a spreader bar (at short or long lengths depending on which eye bolts used)
- a hogtie connector (keeping the bars allows for wider joint fastening while the extended pipes restrict rolling sideways; or removing the pipes makes for a tighter restriction
- a cravat (pictured) where a locking collar is fixed to the end of one bar, wrist restraints are fixed in the middle of the same bar, and ankle restraints are fixed to the middle or end of the side bars (either way, the length of the side bars restrict rolling around)
- a L-shape can bend behind legs of a bed frame, anchoring you in place with your arms hand 1-2 feet apart
- each bar can be removed and played with on its own as a small spreader bar, arm binder, hobbler, etc.
- any of the central eye bolts may be tied off (around a bed frame, to a string with escape keys, to a ice lock)
Materials are below, all from Home Depot:
- 4 PVC Pipes, 1-1/4" (wide) X 2FT (long). ~$3/each. My store had these precut, but you can ask to have a 10FT pipe cut in-store for free.
- 4 3/8" x 6" Eye Bolts with Nut. ~$1.50/each
- 1 PCV Cross 1-1/4". ~$3
- 1 Pack Smaller Eye Bolts. ~$8/25 pack
- 1 Drill with appropriate bits (pre-owned, or you can rent)